Plan d'accès
Description du produit
Inclus :
Micro PG 58
Microphone Type
Dynamic (moving coil)
Frequency Response
60 to 15,000 Hz
Polar Pattern
Cardioid
Output Impedance
EIA rated at 150 ohms (300 ohms actual)
Sensitivity at 1 kHz, open circuit voltage
2.2 mV
1 Pascal=94 dB SPL
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Net Weight
321 g (0.71 lb)
Connector
Three-pin professional audio (XLR), male
Operating Temperature
-29 deg to 57 deg C (-20 deg to 135 deg F)
Relative Humidity
0 to 95%
-------------------------------------------------------------------------------
PGX4 Wireless Reciever
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
Audio Output Level
(ref. ± 38 kHz deviation, 1 kHz tone)
XLR connector (into 600 Ω load): -13 dBV
1/4" connector (into 3000 Ω load): -2 dBV
Output Impedance
XLR: 200 Ω
1/4": 1 k Ω
Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
> 70 dB, typical
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Power Requirements
12-18 Vdc at 150 mA, supplied by external power supply
Micro PG 58
Microphone Type
Dynamic (moving coil)
Frequency Response
60 to 15,000 Hz
Polar Pattern
Cardioid
Output Impedance
EIA rated at 150 ohms (300 ohms actual)
Sensitivity at 1 kHz, open circuit voltage
2.2 mV
1 Pascal=94 dB SPL
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Net Weight
321 g (0.71 lb)
Connector
Three-pin professional audio (XLR), male
Operating Temperature
-29 deg to 57 deg C (-20 deg to 135 deg F)
Relative Humidity
0 to 95%
-------------------------------------------------------------------------------
PGX4 Wireless Reciever
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
Audio Output Level
(ref. ± 38 kHz deviation, 1 kHz tone)
XLR connector (into 600 Ω load): -13 dBV
1/4" connector (into 3000 Ω load): -2 dBV
Output Impedance
XLR: 200 Ω
1/4": 1 k Ω
Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
> 70 dB, typical
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Power Requirements
12-18 Vdc at 150 mA, supplied by external power supply